|The Peerless Black 2000T model is a great little air compressor built for the tradie or DIYer, being an oil less air compressor it is super quiet, less than 52dBa.
Slow revving at 1350RPM drawing 6AMP's compared to most other direct drives at 2850RPM drawing 8+AMP's.
Built as a tube tank design to maximise space when needed. delivering 65LPM of free air delivery, this is a great design that will reduce the footprint of a conventional air compressor.
Best suited for framing guns, car tyre inflation or the odd job to blow out.
Did you know?
In standard environment conditions when your air compressor reaches 14 PSI you have the reached the volume of air in the receiver!. So on this particular model (PB2000T) at 14 PSI you have 5L of compressed air in the tank. At 28 PSI you now have 10L of compressed air in the tank. So if the cut out pressure is 112 PSI, you now have 40L of stored compressed air! Who said small tanks don't hold enough air?
As mentioned this can be affected by the temperature and other factors.
Smaller tanks also equates to quicker air recovery times of lost pressure along with lower operating temperature of pump.
Please note: air compressors i.e piston type, are not designed to run continuously they must cut in and out. Direct drive models should only have up to a 40-50% duty cycle. Belt Drive hobby models are up to 60-70% and full industrial belt drive models are up to 75-85%. If the compressor runs over these duty cycles it could cause failure. Important - first check voltage on each building site as low voltage will cause the motor to fail on all compressors. It must have be better than 230 volt at peak times. Extension leads will cause voltage drop, it's better to use extra air hose.
Air Delivery 65 LPM @ 100PSI
Max PSI 145
Motor 1.1 HP
Pump Oil Less
Pump RPM 1350
Power Supply 10 AMP
Amps Draw 6
Tank Size 5 L
Dimensions (L x W x H) 420mm x 370mm x 440mm
Portable / Stationary Portable
Regulator Included: Regulator fitted